Produktai skirti kalcitas cwf 1200 (25)

Dr. Paul Lohmann® offers Magnesium Carbonate as powder, granules in food/pharma/ chem. pure grade as well as for food supplements. For pharmaceutical applications, it is used for the treatment of hypomagnesemia. For food applications, it is used as acid regulator, for anti-caking and for magnesium fortification. For industrial applications, it is used for the production of glass ceramics and enamels and as a flow aid. CAS 12125-28-9 / 39409-82-0 EINECS 235-192-7 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

92-96% CaCO3 min. 50% CaO

Mineral Plus

DERIVADOS DEL FLUOR is a global leader in the supply of hydrofluoric acid and a wide range of inorganic fluorides, including potassium fluoride. Our potassium fluoride supply principles focus on safety, service, and quality, and adaptation to our customers’ needs: We deliver potassium fluoride in standard packaging and other specialized containers adapted to suit our customers’ needs. Close cooperation with our clients enables DDF to provide a quality product that meets the highest standards. Our continuous production cycle, robust inventory, and logistics service enables us to provide international just-in-time delivery to our customers’ facilities. Our robust inventory together with our logistics service enables us to provide international just-in-time delivery to our customers’ facilities. Chemical Formula:KF Description:White powder Identification CAS No:7789-23-3 Identification UN No:1812 Concentration:> 99% KF Packaging:25 kg sack Transport ADR:6.1T5-III Transport RID:6.1T5-III Transport IMDG:6.1 Transport OACI:6.1

1.65€ TTC

El PCC se diferencia del GCC (Carbonato cálcico natural) por poder: -Disponer de partículas de menor tamaño y más uniformes. -Presentar distribuciones granulométricas más estrechas y estables. -Ejercer menor abrasión -Presentar superficies específicas superiores. -Asegurar purezas químicas más elevadas. Le PCC se différencie du GCC (Carbonates de Calcium Naturels) en ce qu’il permet de : -Disposer de particules plus petites et plus uniformes. -Présenter des distributions granulométriques plus étroites et plus stables. -Exercer moins d’abrasion. -Présenter des surfaces spécifiques supérieures. -Assurer des puretés chimiques plus élevées. The PCC can be distinguished from the GCC (Ground Calcium Carbonates) for: -The possibility to achieve smaller and more uniform particle sizes -More stable and narrower granulometric distribution -Lower abrasivity -Higher specific surface -Highest chemical purity.

Les produits broyés sont les produits historiques de la carrière, expérimentée dans ce domaine depuis plus de 150 ans. Ils sont essentiellement utilisés en verrerie, et peuvent, à la demande, être séchés, défillérisés (on parle alors de 0,1/2mm) et éventuellement réhumidifiés. Leur faible taux d’impureté en aluminium et en fer et leur haut taux en calcaire (>98,5%) en font un produit de choix, introuvable ailleurs à 250 kilomètres à la ronde. Ils peuvent être, au choix, chargés par péniches (jusque 1350 T) ou par camions. Contactez-nous pour des informations complémentaires

Calcium Chloride 94% is an ionic compound of calcium and chlorine. It can be produced either directly from limestone or as a by product of the Solvay process. It is hygroscopic in nature and behaves as a typical ionic halide.

KAR VE YOL TUZU Ham tuzun özel araçlar kullanılarak kırılması sonucu elde edilir. Kara yolları ve gıda sektöründe kar ve yol tuzu kullanımı oldukça yaygındır. Tuz, buzun içerisine girdiği zaman asetik çözeltisi sayesinde çözünme sağlar. Kış aylarında yoğunlukla tercih edilir. Buzlanmayı önleyici etkisi vardır. Araçların yolda düzgün bir şekilde gidebilmesi için tuzlama yapılmasına ihtiyaç vardır. Sabah erken saatlerde bu işlemin gerçekleştirilmesi buzlanmayı önleyebilir. Buzlanmanın olumsuz etkilerinden korunmak için tercih edilir. Yol tuzu, lastiklerdeki yol tutuş seviyesini artırır. Sürücüler için güvenli bir sürüş keyfi sunar. Buzlanmadan kaynaklanan kazaları en aza indirir. İnsan sağlığını koruması açısından son derece önemlidir. Birikmiş karların donmasını engellemek amacıyla yollara dökülebilir. Buzlanmaya karşı ve karlı havalarda kullanılması oldukça faydalıdır.

Unser technisch hochreines Kaliumsulfat mit einer Reinheit von >99,8% wird durch eine chemische Reaktion erzeugt. Unser Kaliumsulfat zeichnet sich durch folgende Eigenschaften aus: Hoher Reinheitsgrad: Unser technisch reines Kaliumsulfat wird in einem mehrstufigen Verfahren gereinigt und entspricht den höchsten Qualitätsstandards Für Ihre optimale Weiterverarbeitung bietet unser Kaliumsulfat ist es nahezu frei von Erdalkalimetallen und Chloriden sowie Schwermetallen Sehr gutes Fließverhalten: Kaliumsulfat ist ein kristalliner Feststoff, der ein sehr gutes Fließverhalten aufweist. Es lässt sich leicht transportieren, lagern und dosieren

Summenformel:LiCoO2 CAS:12190-79-3 Molekulargewicht: 97,87 Eigenschaften: Dunkelblaues Pulver, wasserunlöslich. Verwendung: Wird als Rohstoff für Lithium-Sekundärbatterien verwendet. Lithiumkobaltoxid ist ein besseres Kathodenmaterial in Lithium-Ionen-Batterien. Es bietet die Vorteile einer hohen Betriebsspannung, einer stabilen Entladung, einer hohen spezifischen Energie und einer guten Zyklenleistung, ist jedoch teuer ist hoch (Kobalt wird verwendet), schlechte Sicherheit, durchschnittliche Zyklenlebensdauer und schlechte Materialstabilität. Es wird hauptsächlich als Kathodenmaterial bei der Herstellung von Lithium-Ionen-Batterien für Mobiltelefone, Notebooks und andere tragbare elektronische Geräte verwendet. Derzeit hat die Spannung von Lithiumkobaltoxid 4,35–4,45 V erreicht.

We are manufacturer and seller of NATURAL ZEOLITE (Clinoptilolite) Packing : in 25 Kg PP Bags on Pallets or 1 ton Big Bag Sizes : < 100 micron , 0-1 mm, 0,7-1,2 mm and other size : on request. Delivery Capacity : 6000 tons per Month Country of origin : Turkey Application : AGRICULTURE, GULF COURCE , WATER TREATMENT FILTER, OIL DRILLING

On the base of skimmed milk, MEGGLE manufactures Acid Casein and Caseinate for various applications in the food industry. The precipitation of casein is caused by controlled acidification of pure, pasteurized skimmed milk. In a continuous and hygienic process the curd is washed, dried and sieved/ milled to a standardized particle size. Caseinates are converted and dissolved casein fractions. By neutralization of acid casein with alkaline solutions followed by extrusion caseinate is being produced. Characteristics and benefits: Suitable for a wide range of applications Heat stable Strong emulsifying properties Very good solubility Improvement of texture Nutritionally high-quality protein Solvable when using alkaline solution Acid Casein is useable for the production of caseinate

Nuestro Silicato de Circonio hecho con arena de origen Australia y Sudáfrica. También disponemos de Harina.

Reading Alloys hat sich auf Vorlegierungen, Titanpulver und gasverdüste Pulver spezialisiert.

Ce produit a été retiré de notre gamme. Liste

CBG-DP-90 is a dense, refractory, self-flowing concrete with low cement content intended for use in aggressive environments, including contact with molten metals and slags at temperatures up to 1,900°C, especially for the production of monolithic linings of steel ladles, elements of the metal tract and as a repair concrete mass. It can be used for monolithic linings as well as for products of any configuration and complexity. — high temperature resistance — high temperature of liquid phase formation — high mechanical strength — high temperature of onset of deformation under load — does not contain substances that cause allergic reactions — resistant to molten metal, acid and alkaline slags Main application: ferrous, non-ferrous and glass industry, lining of melting aggregates in the production of mineral fibres etc.

Grout CR Composite , castable, anti-washout, controlled shrinkage cement mortar, superfluid consistency, based on high-resistance cements, superpozzolanic fillers (MICROSIL 90), polymeric modifiers, shrinkage resistant agents, specific additives, calcium silicate mineral fibres, selected silica aggregates. - Based on of thickened silica fume - three-dimensionally reinforced fibre with mineral and synthetic fibres - Provides high adherence and adhesion - dimensionally stable (shrinkage-compensated) - Provides high stability-physical chemical and resistance to chlorides and sulphates - suitable for underwater castings: it is anti-washout - high strength in terms of hydrostatic positive and negative thrust. Repair and protective coatings of hydraulic structures, marine and underwater structures, and articles in critical situations: harsh chemical-physical, leaching water, marine atmosphere, etc. Filling of formwork for the containment of cast immersed in sea water. In case of underwater application, the installation operations must be carried out within 8-10 hours of cleaning and "fouling" (accumulation and deposits of organic and inorganic particles on product surfaces) removal. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour 2/3 of total mixture water in the cement mixer, gradually add the product and the remaining water, until a homogeneous mixture of the required consistency is obtained. For sizable filling thicknesses, greater than 60 mm, Ghiaietto 6.10 (inert washed is selected with a particle size of from 6-10 mm) can be added in a percentage ranging from 20% to 40 %, on the basis of practical requirements. In some particularly demanding cases in terms of the resistance to the "dry-wet" cycle (for example, for the action of the tides) or for chemical attacks particularly strong, it would be advisable to add, in addition to the gravel, even thickened silica fume(MICROSIL 90), and in a variable amount depending on the thickness and construction-related need, to further improve the waterproofing and the mechanical strength of the product. In these cases, please contact our Technical Service. In the case of casts in water, make sure of perfect product hardening before removal of the formwork. Approximately 20,50 kg/m² of Grout CR for every centimetre of thickness to be implemented (approximately 2050 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

Grout 2 HP Grout 2 HP is a pourable, fiber-reinforced mortar, used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. The formulation contains very fine high-strength cements, micro-silicas with pozzolanic activity, aggregates in a rational granulometric curve (0.1 ÷ 1.8 mm), and special antisegregative additives. The product is mixed with 11% - 12% of water, requiring vigorous and prolonged mechanical mixing. The special formulation of Grout 2 HP provides the castings with mechanical strength, fracture energy, exceptional durability, and very high chemical-physical resistance. Grout 2 HP has a workability time of about 60-90 minutes, after which the setting process is triggered, followed by progressive hardening. The plastic and hygrometric shrinkage is extremely low thanks to the presence of Readymesh PM-060 multifilament synthetic fibers, which provide volumetric stability. The performances that make Grout 2 HP unique are: • very high compressive mechanical strengths (> 90 MPa at 28 days), • very high mechanical resistance to bending-traction (> 12 MPa after 28 days), • excellent durability and resistance to chemical attacks. Grout 2 HP is used for structural restoration operations, anchoring of steel bars and strands, reinforced micropiles, tie rods, and riveting. It is particularly suitable for operations where high mechanical performance is required after short curing (compressive strength at 3 days > 60 MPa) and in operations carried out in severe exposure environments (XC - XS - XF), characterized by aggression from sulphates, chlorides, and nitrates. The material can also be used for repairs in anchoring areas subject to high stresses. The application surfaces must be clean, free of dirt, crumbly and incoherent parts, dust, etc., and suitably saturated with water until reaching the condition of "saturated with dry surface". Adequate roughening of the surfaces by scarifying, sandblasting, etc. is always necessary to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is strongly recommended, for optimal performance of site operations, to use a vertical axis mixer with planetary movement or a double horizontal helicoid. The powder is mixed with drinking water to the extent of 11% - 12%, referring to the total weight of the mortar (about 2.75 liters per 25 kg bag) until a homogeneous mixture is obtained. Mixing time: about 4 minutes with a high efficiency mixer. The anchoring can be filled with a single screw pump, for mortars. Pumping must be carried out at a controlled speed to ensure a low working pressure. In case of restorations, the surface must be protected, after application, by polyethylene sheets or anti-evaporation treatments. Packaging: 25 kg bag Unit of Measure: €/kg

Dr. Paul Lohmann® bietet Zinkgluconat als Pulver, feines Granulat in Pharmaqualität und für Nahrungsergänzungsmittel an. Im Pharmabereich wird es zur Behandlung von Zinkmangel eingesetzt. Im Foodbereich wird es zur Zinkanreicherung eingesetzt. CAS 4468-02-4 (w.frei) EINECS 224-736-9 Dr. Paul Lohmann® führt Produkt- und Anwendungsentwicklung in enger Zusammenarbeit mit den Kunden durch. Dazu gehört die Anpassung chemischer und physikalischer Parameter wie Schüttdichte, Benetzbarkeit, Partikelgröße, Reinheit oder pH-Wert.

Pour l’agglomération du minerai de fer, ces castines sont constituées de calcaire à plus de 97% de carbonate de calcium. Elles servent également de composant dans les engrais. Contactez-nous pour des informations complémentaires

Kaya tuzu insan sağlığı için en önemli bileşenleri bünyesinde toplayan doğal mineral kaynağıdır. Vücudumuzda bulunan 92 mineralden 84 tanesi bu tuzun içeriğinde yer alır. Büyükbaş sığır ve küçükbaş koyun keçilerin önünde sürekli bulunması gereken doğal tuzdur. Hayvanlar için kaya tuzu, hayvanların vücutlarında bulunan sodyum, klorür, potasyum ve magnezyum gibi minerallerin dengeye getirilmesine yardımcı olmak için kullanılan bir tuz türüdür

2.65€ TTC

CBG-DP-90 ist ein dichter, feuerfester, selbstfließender Beton mit niedrigem Zementgehalt, der für den Einsatz in aggressiven Umgebungen, einschließlich Kontakt mit geschmolzenen Metallen und Schlacken bei Temperaturen von bis zu 1.900°C, insbesondere für die Herstellung von monolithischen Auskleidungen von Stahlpfannen, Elementen des Metalltrakts und als Reparaturbetonmasse bestimmt ist. Er kann sowohl für monolithische Auskleidungen als auch für Produkte beliebiger Konfiguration und Komplexität verwendet werden. — hohe Temperaturbeständigkeit — hohe Temperatur der Flüssigphaseentstehung — hohe mechanische Belastbarkeit — hohe Temperatur beim Einsetzen der Verformung unter Last — enthält keine Stoffe, die allergische Reaktionen hervorrufen — beständig gegen Metallschmelze, saure und alkalische Schlacken Hauptanwendung: Eisen-, Nichteisen- und Glasindustrie, Auskleidung von Schmelzaggregaten bei Herstellung von Mineralfasern etc. Zusammensetzung:Korund, Tabulartonerde, Spinell Bindung:Hydraulisch Anwendungstemperatur:bis zu 1 .900°C Temperaturwechselbeständigkeit:> 40 Wasserabkühlzyklen von 1300°C bis auf Kühlwassertemperatur Temperatur bei Beginn der Verformung unter Last 0,2 MPa:1 .850°С Dichte:2.850 kg/m³ Maximale Korngröße:10 mm Wasserverbrauch:5,0-5,3 l/100 kg Chemische Zusammensetzung:Al2O3 - 88,5 % ; MgO - 0,5 % ; Cr2O3 - 2,5 % ; Fe2O3 - 0,5 % ; CaO - 5,0% Dichte (g/cm³):2,85 (bei Temp. 110 °C) ; 2,85 (bei Temp. 800 °C) ; 2,90 (bei Temp. 1350 °C) Wärmeleitfähigkeit (W/m∙K):1,94 (bei Temp. 110 °C) ; 2,56 (bei Temp. 800 °C) ; 2,70 (bei Temp. 1350 °C) Druckfestigkeit (MPa):85 (bei Temp. 110 °C) ; 80 (bei Temp. 800 °C) ; 110 (bei Temp. 1350 °C) Restliche lineare Deformation (%):0 (bei Temp. 110 °C) ; 0 (bei Temp. 800 °C) ; -0,1 (bei Temp. 1350 °C) Offene Porosität (%):n.a. (bei Temp. 110 °C) ; 16,0 (bei Temp. 800 °C) ; 14,9 (bei Temp. 1350 °C)